DIY Polymer Clay Plant Stakes

Over the last couple of months, I’ve been seeing all sorts of new shops popping up on Etsy and Instagram promoting cheap and cheerful jewelry made from polymer clay and I am here for it.

Polymer clay is super easy to work with, lightweight (which is why it is PERFECT for earrings), relatively inexpensive, and doesn’t require a ton of specialized tools or equipment. Most people have heard of it—Fimo, Sculpey, etc.—but I don’t know too many people in my circle who have actually worked with it. It could just be the best kept secret in crafting… until now.

I have used polymer clay for a Canola Eat Well Camp craft before, so when they came to me looking for an easy DIY to include in a virtual workshop kit, I knew a clay project would be a good fit for their brand and easy for participants to execute on their own.

Because the theme of the Eat Well kit was “planting,” and would include a seed planting activity, I decided to do a clay plant stake project. It ticked all the boxes: easy, fun, excellent chance of success, on budget, and mailable. As well, the nature of the material makes the project open to creative interpretation, which is always a plus for the Eat Well gang.

The Kits

Because the kits were being mailed out as part of a larger package, I tried to keep them as compact as possible, including only the things that participants might not have at home: polymer clay, a small pot of acrylic glaze, a foam paintbrush, a craft stick, and a small handful of dried grasses (for an authentic prairie touch). To keep things simple for the crafters, all that is needed to complete the project is a work surface, a rolling pin or bottle, a cutting tool, and an oven.

Remember that point about creative interpretation? Participants are encouraged to supplement the dried grasses with stamps or small objects that could be pressed into the rolled-out clay to truly make this DIY their own. I also made a point to not include a template—once the clay is rolled out it can be cut into any shape the crafter desires.

The Video

To get their participants off to a great start with their kits, the Canola crew put together an amazing how-to video. You can watch it here!

The How To

You’ll need:
white or natural oven-dry polymer clay (Fimo, Sculpey, etc.)
acrylic paint or glaze (see note below)
wooden stick (to stir paint)
impression items (grasses, leaves, stamps, buttons, etc.)
foam brush or paintbrush
cookie sheet and parchment paper
rolling pin
knife
paper towel

  1. Warm up your clay by rolling it back and forth in your hands. Next, roll it into a ball, then into a snake. Repeat a couple times, until your snake can easily and fully bend in the middle without cracking.
  2. Place your clay onto a piece of parchment on your work surface. Using a rolling pin, gently roll your clay out to slightly thicker than 1/4,” flipping at least once to prevent sticking.
  3. Lay your impression items on the surface of the clay. Gently and evenly roll over the surface one more time, pressing them into the soft clay. TIP: To ensure a sturdy stake, do not let your clay get any thinner than 1/4” thick.
  4. Carefully lift item(s) off the surface. If anything sticks into the clay (small seeds, etc.), wait until after the clay has been baked to remove.
  5. Using a knife, cut your clay into whatever shapes you desire. Cut the bottom of each shape into a point or triangle to make it easier to insert into the soil.
  6. Carefully transfer your shapes to a baking sheet lined with parchment. Bake at 275°F for about 15 minutes. (Less if your clay is thinner.) Clay will be slightly soft when removed from the oven but will firm up as it cools.
  7. Once your plant stakes are cool, apply glaze to highlight the pattern. Use foam brush to apply to the entire surface, pressing into the impressions, then gently wipe away the excess with a paper towel. Repeat, if necessary, until you get the desired effect.

Note: You can use any acrylic craft paint for this project. To get the weathered, transparent look, mix one part acrylic paint and one part acrylic medium or clear glazing/antiquing liquid, OR thin your paint with plain water until it is more of a wash. To test your glaze/wash, brush a small amount over a piece of newspaper or junk mail. You should be able read the type.

Yarn-bombing – Silent Wind Chimes

So, you’ve yarn-bombed some sticks… now what? Make a silent wind chime! They’re super-cute, easy to put together and they don’t make a racket like those pesky metal chimes.

Here’s what you need:

3-5 Yarn-bombed Sticks
Metal Canning Jar Ring (or jar lid)
Yarn for hanging
Beads (optional)
Metal Punch (or hammer and a large nail) (optional)
Drill with small bit (optional)


You might want to add a bead (or three!) at this point.

Step one: Get your yarn-bombed sticks ready for hanging! You can drill a hole in the top of each stick, or just tie your hanging yarn to the top. Use a slightly longer piece of yarn than you think you need. It’s always easier to trim than to add or start over!

** See below for an easy way to thread the yarn through small holes.

While you’re getting things ready, you might want to punch holes in your jar ring, but that’s totally optional. If you do, you’ll need three or four holes in the top rim of the ring, and one hole for each stick around the sides. I used a small metal punch, but you can use a hammer and nail – or not!

Once you have added hanging yarn to all of your sticks, you can move on to the next step…

Look! I added another bead!

Step two: Add three or four hanging strings to your jar lid! Take the time to space them evenly to ensure your chimes hang nice and straight.

You can either use those holes you punched in your ring, or tie the strings on if you didn’t punch. (If you tie-on, we’ll add a length of yarn around the ring later to keep your “chimes” in place.)

If you’ve punched holes, thread your yarn through (using that handy tip below) from the top, then tie a small knot on the inside and trim excess.

Tie a knot in the strings, a few inches from the top, to create your hanging loop. Hold it up and make sure it’s hanging evenly before moving on to step four.

Step three: Add your yarn-bombed sticks! Tie the yarn to the ring, or thread it through the holes you punched in step one and tie a knot. Make sure to place heavier sticks opposite each other to keep your wind chime hanging evenly.

TIP: Before you trim your excess yarn, check the length of your chimes.

To keep your chimes from sliding around (and to pretty it up), wrap a long piece of yarn around the outside of the ring and tie-off. (See pic of finished project at the top of this post!)

All that’s left is to hang up your wind chimes and enjoy the sweet sound of silence!


A quick trick to thread yarn through smallish holes:

Use a fine-gauge crafting wire to thread yearn through holes. Works great for beads, too!